STEP 1

Place all components in front of the wall. All cabinets, except the high cabinet, are delivered pre-assembled. Attach the uprights (U-profiles) to the back of the base cabinets using included screws. The narrow uprights should be mounted on the outer edges, while the wider ones are placed between two tool panels and base cabinets. The number of wide uprights depends on how many cabinets and panels are included in your setup.

STEP 2

Position the perforated panel between the uprights. Secure the panel to the uprights using included screws and nuts. Then slide the garage setup into position against the wall.

STEP 3

Attach the wall cabinets to the threaded holes in the perforated panel using included screws. Cover the holes on the sides of the cabinets with plastic plugs. Next, place the worktop on top of the base cabinets and drawer units. Secure it from underneath by opening the cabinet doors or pulling out the top drawer.

STEP 4

The garage interior can be freestanding. However, for added stability, it can also be secured to the wall. The high cabinet is delivered flat-packed but is easy to assemble yourself: snap the back and side panels into the bottom frame, add the top panel, and hook the doors into place. Done!